Add method to read PHY configuration.

src/device.rs

@@ -62,6 +62,13 @@ impl<SpiBus: ActiveBus, NetworkImpl: Network> Device<SpiBus, NetworkImpl> {
         None
     }
 
+    pub fn phy_config(&mut self) -> Result<register::common::PhyConfig, SpiBus::Error> {
+        let mut phy = [0u8];
+        self.bus
+            .read_frame(register::COMMON, register::common::PHY_CONFIG, &mut phy)?;
+        Ok(phy[0].into())
+    }
+
     pub fn into_interface(self) -> Interface<SpiBus, NetworkImpl> {
         self.into()
     }

src/register.rs

@@ -1,11 +1,126 @@
 pub const COMMON: u8 = 0;
 pub mod common {
+    use bit_field::BitArray;
+
     pub const MODE: u16 = 0x0;
-    pub const GATEWAY: u16 = 0x1;
+    pub const GATEWAY: u16 = 0x01;
-    pub const SUBNET_MASK: u16 = 0x5;
+    pub const SUBNET_MASK: u16 = 0x05;
-    pub const MAC: u16 = 0x9;
+    pub const MAC: u16 = 0x09;
-    pub const IP: u16 = 0xF;
+    pub const IP: u16 = 0x0F;
+    pub const PHY_CONFIG: u16 = 0x2E;
     pub const VERSION: u16 = 0x39;
+
+    #[derive(Debug, Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+    #[repr(u8)]
+    pub enum PhyOperationMode {
+        /// 10BT half-duplex. Auto-negotiation disabled.
+        HalfDuplex10bt = 0b000_000,
+        /// 10BT full-duplex. Auto-negotiation disabled.
+        FullDuplex10bt = 0b001_000,
+        /// 100BT half-duplex. Auto-negotiation disabled.
+        HalfDuplex100bt = 0b010_000,
+        /// 100BT full-duplex. Auto-negotiation disabled.
+        FullDuplex100bt = 0b011_000,
+        /// 100BT half-duplex. Auto-negotiation enabled.
+        HalfDuplex100btAuto = 0b100_000,
+        /// Power down mode.
+        PowerDown = 0b110_000,
+        /// All capable. Auto-negotiation enabled.
+        Auto = 0b111_000,
+    }
+
+    impl From<PhyOperationMode> for u8 {
+        fn from(val: PhyOperationMode) -> u8 {
+            val as u8
+        }
+    }
+
+    impl Default for PhyOperationMode {
+        fn default() -> PhyOperationMode {
+            PhyOperationMode::Auto
+        }
+    }
+
+    #[derive(Debug, Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+    #[repr(u8)]
+    pub enum PhySpeedStatus {
+        /// 10Mbps based.
+        Mbps10 = 0,
+        /// 100Mbps based.
+        Mbps100 = 1,
+    }
+
+    #[derive(Debug, Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+    #[repr(u8)]
+    pub enum PhyDuplexStatus {
+        /// Half duplex.
+        HalfDuplex = 0,
+        /// Full duplex.
+        FullDuplex = 1,
+    }
+
+    #[derive(Debug, Copy, Clone, Eq, PartialEq)]
+    pub struct PhyConfig([u8; 1]);
+
+    impl PhyConfig {
+        // Link status bit position.
+        const LNK_POS: usize = 7;
+        // Speed status bit position.
+        const SPD_POS: usize = 6;
+        // Duplex status bit position.
+        const DPX_POS: usize = 5;
+        // Operation mode bit position.
+        // const OPMDC_POS = 2;
+        // Configure PHY opeartion mode bit position.
+        // const OPMD_POS = 1;
+        // Reset bit position.
+        // const RST_POS = 0;
+
+        /// PHY link status.
+        ///
+        /// `true` if the link is up, `false` if the link is down.
+        pub fn link_up(&self) -> bool {
+            self.0.get_bit(Self::LNK_POS)
+        }
+
+        /// PHY speed status.
+        pub fn speed(&self) -> PhySpeedStatus {
+            if !self.0.get_bit(Self::SPD_POS) {
+                PhySpeedStatus::Mbps10
+            } else {
+                PhySpeedStatus::Mbps100
+            }
+        }
+
+        /// PHY duplex status.
+        pub fn duplex(&self) -> PhyDuplexStatus {
+            if !self.0.get_bit(Self::DPX_POS) {
+                PhyDuplexStatus::HalfDuplex
+            } else {
+                PhyDuplexStatus::FullDuplex
+            }
+        }
+
+        /// PHY operation mode.
+        pub fn operation_mode(&self) -> PhyOperationMode {
+            match self.0[0] & 0b111_000u8 {
+                0b000_000 => PhyOperationMode::HalfDuplex10bt,
+                0b001_000 => PhyOperationMode::FullDuplex10bt,
+                0b010_000 => PhyOperationMode::HalfDuplex100bt,
+                0b011_000 => PhyOperationMode::FullDuplex100bt,
+                0b100_000 => PhyOperationMode::HalfDuplex100btAuto,
+                0b110_000 => PhyOperationMode::PowerDown,
+                0b111_000 => PhyOperationMode::Auto,
+                _ => unreachable!(),
+            }
+        }
+    }
+
+    impl core::convert::From<u8> for PhyConfig {
+        fn from(val: u8) -> Self {
+            PhyConfig([val])
+        }
+    }
 }
 
 pub const SOCKET0: u8 = 0b000_00001;