tuxmain/w5100-rs
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Apply clippy suggestions

Browse source
This commit is contained in:
Michael Watzko 2025-03-21 15:52:22 +01:00
commit 4743976211
4 changed files with 10 additions and 10 deletions
Download patch file Download diff file Expand all files Collapse all files

2
src/bus/four_wire.rs
View file

@ -41,7 +41,7 @@ impl<SPI: SpiDevice> Bus for FourWire<SPI> {
} }
fn write_frame(&mut self, block: u8, address: u16, data: &[u8]) -> Result<(), SPI::Error> { fn write_frame(&mut self, block: u8, address: u16, data: &[u8]) -> Result<(), SPI::Error> {
let control_phase = block << 3 | WRITE_MODE_MASK; let control_phase = (block << 3) | WRITE_MODE_MASK;
let address_phase = address.to_be_bytes(); let address_phase = address.to_be_bytes();
self.spi.transaction(&mut [ self.spi.transaction(&mut [

2
src/bus/three_wire.rs
View file

@ -78,7 +78,7 @@ impl<SPI: SpiBus> Bus for ThreeWire<SPI> {
} }
fn write_frame(&mut self, block: u8, mut address: u16, data: &[u8]) -> Result<(), Self::Error> { fn write_frame(&mut self, block: u8, mut address: u16, data: &[u8]) -> Result<(), Self::Error> {
let mut control_phase = block << 3 | WRITE_MODE_MASK; let mut control_phase = (block << 3) | WRITE_MODE_MASK;
let mut data_phase = data; let mut data_phase = data;
let mut last_length_written: u16; let mut last_length_written: u16;

4
src/device.rs
View file

@ -26,7 +26,7 @@ impl<E> From<E> for ResetError<E> {
mod private { mod private {
pub trait Sealed {} pub trait Sealed {}
impl<'a, T: Sealed> Sealed for &'a mut T {} impl<T: Sealed> Sealed for &'_ mut T {}
} }
pub trait State: private::Sealed { pub trait State: private::Sealed {
@ -73,7 +73,7 @@ impl<HostImpl: Host> State for DeviceState<HostImpl> {
} }
} }
impl<'a, T: State> State for &'a mut T { impl<T: State> State for &'_ mut T {
fn socket(&mut self) -> Option<Socket> { fn socket(&mut self) -> Option<Socket> {
T::socket(self) T::socket(self)
} }

12
src/register.rs
View file

@ -418,14 +418,14 @@ pub mod socketn {
/// > It should be read or to be updated like as follows. /// > It should be read or to be updated like as follows.
/// > 1. Read the starting address for saving the transmitting data. /// > 1. Read the starting address for saving the transmitting data.
/// > 2. Save the transmitting data from the starting address of Socket n TX /// > 2. Save the transmitting data from the starting address of Socket n TX
/// > buffer. /// > buffer.
/// > 3. After saving the transmitting data, update Sn_TX_WR to the /// > 3. After saving the transmitting data, update Sn_TX_WR to the
/// > increased value as many as transmitting data size. If the increment value /// > increased value as many as transmitting data size. If the increment value
/// > exceeds the maximum value 0xFFFF(greater than 0x10000 and the carry /// > exceeds the maximum value 0xFFFF(greater than 0x10000 and the carry
/// > bit occurs), then the carry bit is ignored and will automatically update /// > bit occurs), then the carry bit is ignored and will automatically update
/// > with the lower 16bits value. /// > with the lower 16bits value.
/// > 4. Transmit the saved data in Socket n TX Buffer by using SEND/SEND /// > 4. Transmit the saved data in Socket n TX Buffer by using SEND/SEND
/// command /// > command
pub const TX_DATA_WRITE_POINTER: u16 = 0x24; pub const TX_DATA_WRITE_POINTER: u16 = 0x24;
/// Socket n Received Size Register /// Socket n Received Size Register